Sorry to hear you’re having trouble with your Pit Boss Ernest! The ‘ErL’ error usually indicates an issue with the temperature probe or a power connection problem. Here are a few things you can try:

Power Cycle: Unplug the grill from the outlet for about 10-15 minutes, then plug it back in and restart it. This can sometimes reset the system.
Check the Temperature Probe: Make sure the probe is clean and securely connected. If it’s loose or dirty, the grill might throw the ErL error.
Inspect for Moisture: If it’s been humid or rainy, moisture could have gotten into the control board. Keeping it plugged in might not help; try drying the grill interior and control panel with a fan or towel.
Contact Pit Boss Support: If the above steps don’t work, the issue might require further troubleshooting or warranty support. They can walk you through more advanced solutions or help you get a replacement part if needed.
Hope this helps get you back to grilling!

Bought it new, have used it 4 times. How do I get rid of the ErL. I still have it plugged up tonite.
And the burners have shutdown.

The “HEr” code on a Pit Boss grill indicates that the unit has overheated. This typically happens if the internal temperature exceeds a safe threshold, often due to factors like too much fuel, a grease fire, or airflow issues.

To address this error:

Turn off and unplug the grill, letting it cool completely.
Check for grease buildup in the firepot and clean it thoroughly to prevent flare-ups.
Remove excess pellets from the hopper and firepot, which can contribute to overheating.
After cooling, restart the grill and monitor it closely.

Hiya Rick 🙂

Was it definitely a 7? I have seen the 4p1 before

Hi Mark
ERL code means that there’s something not quite right with the igniter or temperature probe in your unit. Has it been cleaned lately?